SD card socket
Centronics interface
USB
interface
Fan-fold paper
entrance chute
RS-232C
interface
Power jack
socket
Power switch
Media view
window
Graphic LCD with
back light display
Lower front cover
GPIO interface
(Option)
Note: The interface picture here is for reference only. Please refer to th
e product specification for the interface
s availabilit
y.
Ethernet
interface
PS/2 interface
USB host interface
Loading the Ribbon
Printer Overview
Thermal Transfer / Direct Thermal
Bar Code Printer
Quick Start Guide
* Loading path for ribbon
Remove Used Ribbon
Y2271916
Printer right side cover
Media guide bar
Print head
Platen
3” Label
supply spindle
Label roll
guard
Ribbon supply
spindle
Internal rewind
spindle
(Option)
Ribbon
release
button
Damper
Print head pressure
adjustment knobs
Ribbon
rewind
spindle
Label
guide
Media
sensor
Ribbon
sensor
Print head release lever
Media sensor
lock lever
Open the printer right side cover.
Push the print head release lever
to open the print head mechanism.
(1)
Install the ribbon onto the ribbon
supply spindle. Thread the ribbon
through the ribbon sensor slot and
then through the open space in
between print head and platen.
(2)
Wrap the ribbon onto the ribbon
rewind spindle. Keeping the
ribbon
flat a
nd without wrinkles.
(3)
Wind the ribbon clockwise about
3~5 circles onto the ribbon rewind
spindle until it is smooth and
properly stretched.
(4)
Close the print head mechanism
by pushing the both sides of print
head mechanism. Make sure the
latches are engaged securely.
(5)
Break the ribbon between ribbon
guide plate and the ribbon rewind
spindle.
(1)
Push the ribbon release button to
release the ribbon on the ribbon
rewind spindle.
(2)
Then, slide off the ribbon from
ribbon rewind spindle.
(3)
