SXWS9148FM, HSC91
Installation
2
3/1/2013
Bradley
• 215-1360 Rev. G; ECN 13-10-005
Dimensional Information
Installation
(mm)
42-5/8"
(1083)
24"
(610)
13"
(330)
44"
(1118)
11-5/8"
(295)
33-1/8" (841)
to Finished Floor
72" (1828)
to Finished Floor
42" (1064)
to Finished Floor
SXWS9148FM shown.
Rough-ins same for HSC91.
Wall Opening
A
Using the hex key (taped to the shower
panel), remove the ten security screws
from the shower panel and remove the
frame from the panel.
B
Install the frame into the wall
opening per the instructions
included with the frame.
E
Reattach the panel to the frame
with the ten security screws.
C
Install the control buttons per
instructions included with the
valve assembly. Apply 100%
silicone caulk to escutcheon
backside prior to installation
to ensure a water tight seal.
Wipe excess caulk from
front side of escutcheon and
panel.
D
Install the valve assembly and make the
valve connections to the showerhead
and control buttons per the instructions
included with the valve assembly.
Minimum Wall Depth:
Frame Only = 2.0" (51)
ASTM = 4-1/2" (114)
TTST=3.0" (76)
WARNING! After installation, all joints require security
sealant by installer to eliminate gaps (if present)
between wall and fixture.
F
Ensure proper shower head
adjustment and tightening of
screws.
