Bradley Sentry SN2004/AST, Руководство по запчастям и обслуживанию

Страница: 18 / 38

Sentry ™ Washfountain
Parts and Service Guide
18 Bradley Corporation • 215-1472 Rev. F; EN 06-915 2/12/07
Parts List — Pushbutton
1 — Shell 1 1 1 1 1
2 S08-324 Pushbutton Assy. (includes items 3 thru 5) 3 3 4 5 8
3 128-090 Pushbutton Only 3 3 4 5 8
4 179-102 Guide for pushbutton 3 3 4 5 8
5 147-033 Screw for pushbutton 3 3 4 5 8
6 140-743 Bracket - Actuator 3 3 4 5 8
7 110-115 Nut 1/2"-14 3 3 4 5 8
n
8 169-890 Connector 1/8" tube x 10-32 Thd. 3 3 4 5 8
n
9 269-1186 "L" Fitting Adjustable 3 3 4 5 8
n
10 118-279 Actuator Body 3 3 4 5 8
n
11 135-065 Spring 3 3 4 5 8
n
12 125-099 U-Cup for piston 3 3 4 5 8
n
13 119-227A Piston 3 3 4 5 8
n
14 198-010 Duckbill 3 3 4 5 8
15 160-165 Screw - Body mounting 6 6 8 10 16
16 R68-600008 Tubing 1/8" OD (specify length in feet) — — — — —
*
17 S05-157 Aerator Assembly (Std 0.5 GPM) 3 3 4 5 8
19 161-082 Nut - Extension 1/4"-20 x 5-1/8" 2 2 2 2 2
20 130-141 Spanner Wrench for Aerators 1 1 1 1 1
21 130-023 Spanner Wrench for Pushbuttons 1 1 1 1 1
54" Corner 36" Semi 54" Semi 36" Circle 54" Circle
Item Part No. Description Qty Qty Qty Qty Qty
Air Metering Valve (AST4) — Hand Pushbutton and Sprayhead
7
8
9
17
2
15
10
11
12
13
2
3
4
5
6
14
21
17 7
19
16
20
n
Prepack S65-168A
* See following page for additional information.
Pushbutton Replacement
IMPORTANT: Turn off water
supplies before
replacing the
pushbutton.
1. Remove the sprayhead cover by removing
the two screws holding the cover to the
sprayhead module.
2. Inside sprayhead, unscrew the two screws
that hold the actuator body to the bracket
being careful of the spring that will release.
3. Unscrew and remove the coupling if neces-
sary.
4. Unscrew and remove the brass nut if neces-
sary. This will allow the pushbutton assem-
bly to be removed.
5. Carefully take apart the assembly and
replace the parts as needed.
6. After replacement is complete, reassemble
the pushbutton and sprayhead as shown.