2
S19-460
Installation
4/28/08
Bradley Corporation •
215-169 Rev. T; ECN 08-507
IMPORTANT
Read this installation manual completely to ensure proper installation, then file it
with the owner or maintenance department. Compliance and conformity to drain
requirements and other local codes and ordinances is the responsibility of the installer.
Separate parts from packaging and make sure all parts are accounted for before
discarding any packaging material. If any parts are missing, do not begin installation
until you obtain the missing parts.
Flush the water supply lines before beginning installation and after installation is
complete. Test the unit for leaks and adequate water flow. Main water supply to the
eyewash should be “ON” at all times. Provisions shall be made to prevent unauthorized
shutoff.
The ANSI Z358.1 standard requires an uninterruptible supply of flushing fluid at a
minimum 30 PSI (0.21 MPa) flowing pressure. Flushing fluid should be tepid per ANSI
Z358.1.
The inspection and testing results of this equipment should be recorded weekly
to verify proper operation. This equipment should be inspected annually to ensure
compliance with ANSI Z358.1.
Workers who may come in contact with potentially hazardous materials should be
trained regarding the placement and proper operation of emergency equipment per
ANSI Z358.1.
For questions regarding the operation or installation of this product, visit www.
bradleycorp.com or call 1-800-BRADLEY.
Product warranties and service parts information may also be found under ”Products”
on our web site at www.bradleycorp.com.
Installation
THIS
SIDE
UP
Packing List
•
•
•
•
P.
O
. B
ox
3
09
, M
en
om
on
ee
F
all
s,
W
I 5
30
51
R
TE
S
T
TH
IS
U
N
IT
E
A
C
H
W
E
E
K
Te
st-o
perate v
alv
e(s) ea
ch w
eek an
d sign
belo
w
.
R
epor
t an
y m
alfunction
s immed
iat
el
y.
Ve
ntil(e) w
öc
hen
tlic
h im
Te
stbe
trie
b prüf
en,
b
est
ätigt
dur
ch U
nter
sc
hrift.
J
eglic
he S
törun
g s
of
or
t m
elden.
Date
Datum
Date
Signed
Unter
sc
hrift
Signe
Date
Date
Date
Signed
Signed
Signed
D
IE
S
E
S
G
E
R
ÄT
1
S
T
W
Ö
C
H
E
N
TL
IC
H
Z
U
P
R
Ü
FE
N
.
E
S
S
A
I H
E
B
D
O
M
A
D
A
IR
E
Te
st le
fo
nctio
nnem
ent d
es v
alv
es
c
haque sem
aine et
sign
e en b
as.
S
'il y
à quelqu
e c
ho
se qui n
e v
a p
as fait
un
rappor
t im
m
édiatem
ent.
P.O. BOX 309, MENOMONEE FALLS, WI 53052-0309 USA
TEL: 1-800-BRADLEY FAX: (262-251-5817)
http://www.bradleycorp.com
114-051
Installation
Supplies Required:
• 1/2" NPT water supply
• Backfl ow prevention device as required by UPC, IPC and/or local plumbing codes
Step 1: Prepare deck for installation
1. Rough-in 1/2" NPT supply piping from wall where drench hose is desired (piping supplied by installer).
2. Select desired location in deck for drench hose and drill a 1-5/16" (34mm) diameter hole.
3. Install the drain plug using the washers and locknut provided (refer to page 3).
Step 2: Assemble eye/face/body wash
1. Assemble the eye/face/body wash components as shown on page 3.
• Apply pipe sealant (supplied by installer) to all male-threaded pipe joints.
Step 3: Connect water supply
1. Connect the water supply piping (supplied by installer) to the unit.
2. Open the water supply lines and test for leaks and adequate water flow.
