Express® Lavatory System SS-Series
Installation Instructions - For Service Only
SS-3/AST/STD, SS-3/AST/JUV
13
Bradley Corporation •
215-1238 Rev. C; EN 03-813
5/11/04
Soap Dispenser Maintenance
Step 1: Fill soap dispensers
The two soap valves will dispense vegetable/coconut oil liquid soaps, synthetic detergents, vis-
cous lotion soaps, and antiseptic solutions. A 10-15% concentration is recommended for vege-
table or coconut oil liquid soaps. Synthetic detergents, lotion soaps, and antiseptic soaps require
no dilution.
1. Using two screwdrivers (or similar tool), push up on the release tabs located beneath each
soap dispenser and pull out the soap tanks from the sprayhead (see Figure 8a).
2. To remove packing dust, rinse out each soap tank with hot water. Shake water out thoroughly
and allow to dry.
3. Pour the soap into each soap tank's filler hole (see Figure 8b).
4. After each soap tank is filled, position the soap tanks into the sprayhead openings and push into
place.
Figure 8a
Figure 8b
(2) SOAP DISPENSER VALVE
S09-007
(2) SOAP TANK
133-107 (GRAY)
133-131 (PUTTY)
133-131A (COAL)
FILLER HOLE
