2902-2800, 2902-2873, 2902-2874
Adjustable Motor, Adjustable Sensor-Operated Warm Air Hand Dryer
Washroom Accessories
Document No. 8256
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
Phone: 800.BRADLEY (800.272.3539) Fax: 262.253.4161
bradleycorp.com
Orders composed of products indicated as
Brad
ex
®
will be available to ship in three days
after receipt of order at the factory. There is no pricing penalty for this service from Bradley.
Page 1 of 2
This information is subject to change without notice.
1/6/2014
Standard Model 2902-280000 (cast iron white
porcelain)
Brad
ex
®
Standard Model 2902-287300 (steel-white epoxy)
Brad
ex
®
Standard Model 2902-287400 (stainless steel-satin
finish)
Brad
ex
®
Product Materials
2902-2800 COVER:
3
⁄
16
" (4.5 mm) thick one-piece cast iron; white porcelain
enamel coating.
2902-2873 COVER:
1
⁄
16
" (1.5mm) thick one-piece steel; white epoxy finish.
2902-2874 COVER:
1
⁄
16
" (1.5mm) thick one-piece stainless steel; satin finish.
Cover fixed to the base plate with two vandal-proof lock screws and lock with
special key wrench.
ADJUSTABLE MOTOR:
universal-type with high-speed, universal brush, fully
adjustable (3,800–8,200 RPM) potentiometer, Class A; Aluminium centrifugal
double asymmetrical inlet fan wheel; aluminum scroll fan and safety thermal cut-off.
HEATING ELEMENT:
waved wire NiCr heating element mounted on a mica frame
that incorporates a self-resetting thermal cut-off at 302ºF.
ADJUSTABLE SENSOR OPERATION:
electronic infrared detection sensor with
fully adjustable (2"–8") potentiometer. Includes polycarbonate viewing windows.
Automatic shut-off after 60 seconds.
BASE PLATE:
1
⁄
8
" (3 mm) thick aluminum, with four
Ø
5
⁄
16
" (8 mm) holes for wall
mounting. Includes silent blocking to dampen mechanical vibrations.
Installation
Verify all rough-in dimensions prior to installation. Hand dryers require a
dedicated circuit and must be properly grounded. GFI Circuit protection is
recommended. One side of dryer should be mounted to a stud.
Operation
Place hands 3"–6" below nozzle to activate air flow. Dryer will
stop two seconds after hands are removed from air flow.
Recommended for very high traffic areas.
®
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibilty of the installer.
Guide Specification
Surface-mounted ADA-compliant hand dryer shall have a thick cast iron cover
with white porcelain enamel coating (2902-2800) or steel cover with white epoxy
coating (2902-2873) or stainless steel cover with satin finish (2902-2874). Hand
dryer shall include aluminium base plate, fully adjustable (2"– 8") infrared sensor
potentiometer and fully adjustable (3800 - 8200 RPM) universal-type motor
potentiometer with resilient mounts and sealed, lubricated ball bearings. Dryer
shall operate at 64−70 dB while delivering 43−70 CFM of air at 106ºF–111ºF
(41ºC−44ºC) and 4,920−9,840 LFM velocity during user-controlled drying cycle.
Dryer shall have a total power of 800–1,150 W (1.07–1.54 Hp) with a consumption
of 9.5–4.8 A.
Overall dimensions: 10½"H x 11½"W x 4"D (267mm x 292mm x
102mm).
Weight: 7.9 lb (3.58 kg)
Product Specifications
Voltage:
100–120 V, 208 V, 220−240 V Consumption:
9.5–4.8 A
Motor:
1
⁄
3
HP (250 W)
RPM:
3,800–8,200
Nominal power:
1,150 W (1.54 Hp)
Heating element:
900 W (1.20 Hp)
Effective airflow:
36–58 CFM
Nominal airflow:
43–70 CFM
Noise level at 79": 64–70 dB
Airspeed:
4,920–9,840 LFM
Frequency:
50/60 Hz
Insulation:
Grounding required
Temperature (at 4"
distance / 70ºF):
106ºF–111ºF (41ºC–44ºC)
Certificates:
UL 499 / CSA C22.2 /
VDE GS / VDE EMC
Drying time:
12–15 seconds
Mounting:
Surface. ADA-compliant
Protection level:
IP23 Splash Protection
