background image

238-51012-00B REV 3/16

A Spanish language version of these instructions is available by contacting 
the company listed on the rating plate. 
La version espanola de estas instrucciones se puede obtener al escribirle 
a la fabrica cuyo nombre aparece en la placa de especificaciones. 

       WHAT TO DO IF YOU SMELL GAS

x

Do not try to light any appliance. 

x

Do not touch any electrical switch; do not use any 
phone in your building. 

x

Immediately call your gas supplier from a  neighbor’s 
phone.  Follow the gas supplier's instructions. 

x

If you cannot reach your gas supplier, call the fire 

 department. 

Installation and service must be performed by a qualified 
installer, service agency or the gas supplier. 

For your family’s comfort, safety and convenience, we 
recommend this water heater be installed and serviced by a 
plumbing professional.

GAS-FIRED WATER HEATER 

INSTALLATION & OPERATION INSTRUCTION 

MANUAL For Flammable Vapor Ignition Resistant 

System Equipped Water Heater 

WARNING:

  If the information in these instructions is not 

followed exactly, a fire or explosion may result causing 
property damage, personal injury or death. 

FOR YOUR SAFETY 

  Do not store or use gasoline or other flammable, 
  combustible, or corrosive vapors and liquids in the 
  vicinity of this or any other appliance. 

Содержание RG240S6X

































Отзывы: