Bradford White PDX1-40S6FBN Скачать руководство пользователя страница 1

238-47936-00F REV 7/12

 

POWERED DIRECT VENT GAS WATER HEATER 

A Spanish language version of these instructions is available by contacting the 
company listed on the rating plate. 
La version espanola de estas instrucciones se puede obtener al escribirle a la 
fabrica cuyo nombre aparece en la placa de especificaciones. 

 
 

   

 

 

 

 

 

  WHAT TO DO IF YOU SMELL GAS 

 

Do not try to light any appliance. 

 

Do not touch any electrical switch; do not use any 

      phone in your building. 

 

Immediately call your gas supplier from a  neighbor’s 
phone.  Follow the gas supplier's instructions. 

 

If you cannot reach your gas supplier, call the fire 

 department. 

Installation and service must be performed by a qualified 
installer, service agency or the gas supplier. 

 

For your family’s comfort, safety and convenience we recommend 

this water heater be installed and serviced by a plumbing 

professional. 

INSTALLATION AND OPERATING INSTRUCTION MANUAL

 

FOR YOUR SAFETY 

 

   Do not store or use gasoline or other flammable, 

combustible, or corrosive vapors and liquids in the 
vicinity of this or any other appliance. 

WARNING:

  If the information in these instructions is not 

followed exactly, a fire or explosion may result causing 
property damage, personal injury, or death. 

Содержание PDX1-40S6FBN

























































Отзывы: