Page 7
MagnaTherm User’s Manual
To delete the current setting
before entering in the new
value.
The “Enter” button is used to
accept the new value.
This is the indicator that will
be shown when the correct
password has been entered to
allow the setting to change.
The highlighted button
(orange) shows which one
is selected. Some screens
may only allow you to set
one or the other, while some
other screens (example:
pump selection) will allow
you to select any or all of the
options.
These windows will reflect
the allowable ranges of the
parameter
Shows the current setting of
the Parameter.
In this example you are in
Home / Configure / Central Heat / Central Heat One
“Up and Down” arrows are
used to increment the setting
accordingly.
NOTE: You can always tell exactly where you have navigated to
by looking at the icons in the
Navigation Bar.
The “Back” button jumps to the previous screen.
Remember to always save the new setting with the
button.
Typical Numeric Keypad Menu
Typical Selection Screen
