brace DWG 1000, Руководство пользователя

Страница: 10 / 16

Tx - 1c Tx - 1b Tx - 1a
Oh, grow up!
Rx-1
etc...
Plug cables into
all units
fi rst!
!
10
Con fi guring Mul ti ple Transmi tt ers
1. Place Tx-1a close to the receiver. Push and hold the paperclip bu tt on on
transmi tt er unit 1a un ti l the link LED blinks rapidly.
2. Place Tx-1b close to the receiver. Push and hold the paperclip bu tt on on
transmi tt er unit 1b un ti l the link LED blinks rapidly.
3. Con ti nue for all remaining transmi tt ers you want to con fi gure...
4. Push and hold the paperclip bu tt on on the single receiver unit un ti l the link LED
blinks rapidly.
You must press the Rx bu tt on last, or things won’t work!
5. Wait un ti l the link LED's go solid on all the units and then you are done.
All the transmit units are now bonded to the single receiver; even a ft er they are
shut o ff . If you change ba tt eries, they will s ti ll be bonded. The bonded channel
number is a random value of 1 - 65,536. This allows mul ti ple band members to
bond their transmi tt ers to their own receivers without worrying that there will be
a con fl ict on a band-mate’s channel.
Please note: You cannot use more than one of the bonded transmi tt ers at a
ti me. If you do, two (or more) bonded channels will collide with each other. Life -
as we know it - could come to and end, and it would be your fault. And future
authori
ti es will fi nd out who you were , because you registered your rig at
www.braceaudio.com . So, one axe at a ti me, please. The World thanks you...
Up to 12 DWG-1000 TX transmi tt ers can be associated, or bonded, to each
receiver.
But it’s only one Transmi tt er at a ti me!
This is very cool for having
your en ti re rack of axes hooked-up and ready to go; live or in the studio.
Always unplug the transmi tt er(s) that you are NOT using,
to prevent problems when switching to your next axe!