2
IMPORTANT SAFEGUARDS
1.
Please read through the following safety precautions carefully before switching on the Iron.
2.
Keep this instruction manual in a safe place for future reference. Also keep the sales receipt
and, if possible, the gift box with the inner packaging.
3.
Failure to follow all the instructions listed may result in electric shock, fire or serious personal
injury.
4.
Before plugging the Steam Iron into the mains electrical supply, check that the voltage and
power supply comply with the specifications indicated on the rating plate of the appliance.
5.
The Steam Iron is not intended for use for by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
6.
Always place the Steam Iron on a stable, flat, heat-resistant surface. Also ensure that the
surface can take the weight of the unit during use and also when the Steam Iron is resting on its
stand.
7.
The Steam Iron is intended for DOMESTIC USE ONLY and should not be used for commercial
purposes. The Steam Iron should only be used for its intended purpose.
8.
Always keep the Steam Iron out of reach of children. Close adult supervision is necessary when
Steam Iron is used by or near children. Burns can occur from touching hot metal parts, hot water
or steam.
9.
Do not leave the Steam Iron unattended when in use or when connected to the mains electrical
supply.
10.
Unplug the Steam Iron from the mains electrical supply before:
%
Cleaning
%
Filling with water or emptying the water tank
%
Immediately after use
%
While it is being repaired
11.
Do not operate the Steam Iron if the plug or power cord have been damaged, or if it is not
working properly.
12.
The Steam Iron is not to be used if it has been dropped, if there are visible signs of damage or if
it is leaking.
13.
Check the Steam Iron power cord regularly for damage. If the power cord is damaged in any
way, it must be replaced by the manufacturer or its service agent or a similarly qualified person
in order to avoid an electrical hazard.
14.
Do not allow the power cord to hang over sharp table edges or come into contact with hot
surfaces.
15.
To prevent the risk of electrical shock, do not immerse the power cord, plug, or any non-
removable parts of this Iron in water or any other liquid.
16.
The Steam Iron base must not be submerged in water, as any contact with the electrical parts
would create the risk of malfunction and electric shock. Do not use the appliance with wet
hands.