bq Prusa i3 HEPHESTOS, Первые шаги

Страница: 9 / 12

Right-hand
axle X
Part at the right-hand end of Axle X, where
the belt tensioner is held.
1 x
Nut
M5
Left-hand
axle X
Partattheleft-handendofAxleX,wherethe
Nema17motorisheld.
1 x
Nut
M5
Left-hand
axle X
Partattheleft-handendofAxleX,wherethe
Nema17motorisheld.
1 x
Nut
M3
Axle X
tensioner
bearing
B623ZZ
TensioneroftheAxleXbeltwheretheaxial
ball bearing B623ZZ is housed together with
the pulley.
1 x
Nut
M3
Axle X
carriage A
CarriageofAxleXwheretheextruderisheld,
adapted for the use of chains.
2 x
Nut
M3
Axle Y
tensioner
bearing
B623ZZ
TensioneroftheAxleXbelt
where the axial ball bearing
B623ZZ is housed together
with the pulley.
1 x
Nut
M3
Axle Y end of
basic stroke
Part located at the base of Axle Y and
incorporating a screw with an M3 nut to adjust
thetotalstrokeoftheaxle.Itiscomplemented
by the part which holds the end-stop to the
frame.
1 x Nut
M3
Fan support
50 x 50 mm Fan support,
located above the electronics
tocoolthemcorrectly.
2 x
Nut
M3
Fan support 50 x 50 mm Fan support,
located above the electronics
tocoolthemcorrectly.
2 x Nut
M3