30
47
48
49
To go back to AUTOMATIC operation and the current day,
press button (fig. 48).
This will happen in any case 10 seconds after the last
action. The all-purpose programme expires at the end
of the day.
9.11-
Re-insert the body of the unit.
10
-
MANUAL OPERATION
If you want a temperature that is different than the pro-
grammed one, without modifying the set programme,
you can go to MANUAL operating mode by pressing
button (fig. 49).
On the display, the programme graph will be cancelled.
You will now see the value of the previously set tempera-
ture. You can change it at will using the button or
(fig. 50). The unit's default temperature is 20 °C.
After about 5 seconds from the last operation, the room
temperature appears.
In MANUAL operating mode, any temperature can be
chosen between 2 °C and 35 °C, and it will be maintained
until further adjustments are made or until a different
operating mode is selected.
ATTENTION.
The temperature set for the lowest range (T1)
must be greater than the calibration value (if different from
the default value of 0 °C, see chapter15).
TH350 EN 05_08.indd 30
TH350 EN 05_08.indd 30
30-05-2008 8:20:53
30-05-2008 8:20:53
