Programmazione
16
13 - PROGRAMMING THE THERMAL
DIFFERENTIAL
-
Make sure that the unit is in OFF mode.
-
Press button
P
twice (fig. 37).
Either the word
or the word
will appear on the display.
-
Press either the button or the button
(fig. 38) to select
.
-
Press the
P
button once again
(fig. 39).
The current thermal differential value will
appear on the display
.
-
Press button or (fig. 40) to modify this
value as desired.
During operation, setting the differential to
0°C provides compliance with a minimum
start-up/shutdown time of one minute,
regardless of the measured room temper-
ature.
-
Press button
P
to exit programming.
38
37
40
39
X2
