LOADING CUSTOM TUNES INTO VEHICLE:
1.
Connect MyCalibrator to supplied OBDII cord
with CAT 5 plug end plugged into rear of the
device.
8.
MyCalibrator will Check for vehicle ECU unlock
and apply Operating System patch for first
install Only.
DO NOT
disconnect or switch
ignition off at any time.
2.
Connect MyCalibrator to supplied OBDII cord
and plug into vehicle OBDII port. BPT
Motorsport flash screen will appear at every
single plugin.
9.
MyCalibrator will now open up Custom Tune
file and send to ECU, This may take up to 7
minutes to complete. DO NOT disconnect or
switch ignition off at any time.
LI M I T E D W A R R A N T Y
Use of this product is at the entire risk of the original purchaser.
BPT Motorsport guarantees that every MyCalibrator is free from physical defects in material and
workmanship under normal use for one year from the date of purchase. If the product proves defective
during this warranty period, contact us in order to obtain a Return Authorization. When returning a
product, mark the Return clearly with your details outside of the package and include a copy of your
original proof of purchase.
3.
Select “PROGRAMMING” option by touching
the screen.
10.
Once Performance file has been loaded It is
safe to turn the key OFF, Select the “BACK”
button and disconnect the device from the
OBDII port. Alternatively if the MyCalibrator is
permanently mounted it does not have to be
disconnected.
IN NO EVENT SHALL BPT MOTORSPORT LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.
BPT Motorsport makes no
warranty or representation, expressed, implied, or statutory, with respect to its products or the contents or
use of this documentation and all accompanying software, and specifically disclaims its quality,
performance, merchantability, or fitness for any particular purpose. BPT Motorsport reserves the right to
revise or update its products, software, or documentation without obligation to notify any individual or
entity. Please direct all inquiries to:
.
4.
Turn ON ignition switch but DO NOT START,
Press “CONTINUE”.
IN NO EVENT SHALL BPT MOTORSPORT LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.
Warranty is void if device is used in a manner not consistent with
reasonable care.
5.
Select “PERFORMANCE CALS” to upload
performance tunes onto vehicle ECU or TCM.
DO NOT disconnect or switch ignition off at any
time.
MyCalibrator by BPT Motorsport and its pre-loaded calibrations are designed for standard vehicles that
have NOT had any harware, control systems or drivetrain modifications.
The owner of vehicle being flashed accepts full responsibilty for any damages to engine and drivetrain
through modifications installed by them.NOTICE: Ford Motor Company reserves the right to refuse any
warranty claim by the owner if it is deemed by its dealers that the vehicle has been modified in any shape
form or way.
Warranty is void if the device case is opened.
6.
Select the calibration you wish to load to the
vehicle ECU or TCM. DO NOT disconnect or
switch ignition off at any time.
MyCalibrator by BPT Motorsport and its pre-loaded calibrations are designed for standard vehicles that
have NOT had any harware, control systems or drivetrain modifications.
The owner of vehicle being flashed accepts full responsibilty for any damages to engine and drivetrain
through modifications installed by them.
NOTICE: Ford Motor Company reserves the right to refuse any warranty claim by the owner if it is deemed
by its dealers that the vehicle has been modified in any shape form or way.
7.
Press “CONTINUE” to confirm your selection.
DO NOT disconnect or switch ignition off at any
time.
BPT Motorsport 2020 Rev 4.
