QUICK SETUP GUIDE
READING STOCK VEHICLE CALIBRATIONS:
DOWNLOADING CUSTOM TUNES FROM THE CLOUD:
MyCalibrator
1.
Connect MyCalibrator to supplied OBDII cord
with CAT 5 plug end plugged into rear of the
device.
1.
Download and install the PC based Application
from BPT Motorsport.com DOWNLOADS page
or from product description pages.
“MyCalibrator Installer”
2.
Connect MyCalibrator OBDII cord into vehicle
OBDII port. BPT Motorsport flash screen will
appear at every single plugin.
2.
Once Unzipped, Click on setup.exe to install the
User software on your computer
3.
Select “PROGRAMMING” option by touching
the screen.
3.
Once installed plug MyCalibrator device into PC
USB port. The software will auto detect the
device and display “Connected” at the bottom
of the App screen.
4.
Turn ignition switch to ON position but DO NOT
CRANK START, Press “CONTINUE”.
4.
The customer software will automatically Look
for Updates and any “Custom Tunes” for your
vehicle based on the Software Part Number
level found in your cars ECU and TCM.
5.
MyCalibrator will lock to the ECU and save the
stock Engine and transmission file data.
DO
NOT
disconnect or switch ignition off at any
time during this process.
5.
MyCalibrator will download any “Custom
Tunes” for your vehicle. Be aware that there
may be multiple downloads to process.
6.
When prompted, turn OFF ignition switch and
disconnect MyCalibrator from CAT 5 plug on
back of device.
6.
Wait until ALL calibrations have been
downloaded by the device.
Once all Firmware and Software updates have
completed disconnect MyCalibrator from PC
and return to vehicle for Calibration upload.
Go to “
LOADING CUSTOM TUNES INTO
VEHICLE
”
CON TACTS
Dealer Website: http://www.bptmotorsport.com.au
Dealer Email: [email protected]
Telephone: 08 9302 3415
7.
Proceed to “DOWNLOADING CUSTOM TUNES
FROM CLOUD” or if optioned by customer to
have Tunes preloaded proceed to “LOADING
CUSTOM TUNES INTO VEHICLE”
NOTE:
There might be times when a customer
has requested Custom Calibrations to be pre-
loaded into the device, in this case
downloading from the Cloud Server will not be
necessary.
Steps 1. to 6. As above can be ignored.
