PROGRAMMING THE TIME CLOCK
•
Only program the ON/OFF time slots you require. DO NOT program 0’s or any other digits into ON/OFF positions
unused.
e.g. if you require 06:30 ON - 08:30 OFF MON to SUN, use only the first ON/OFF time slot.
•
Carry out a full Reset to start programming. This will delete all previously programmed times and set the ‘time of
day’ to 0: 00.
RESET PROCEDURE
FLASHING
OFF
0:00
YOU ARE NOW IN THE PROGRAM MODE
CARRY OUT PROGRAMMING WITHIN 1 MINUTE
OR THE DISPLAY WILL REVERT TO:
0:00
AFTER A TEST DISPLAY,
DISPLAY SHOULD SHOW
PRESS & HOLD BOTH BUTTONS
WHEN DISPLAY BLANKS
RELEASE BOTH BUTTONS
SET DAY & REAL TIME (e.g. Wednesday 11:30 am)
DISPLAY SHOULD NOW
SHOW AS UNDER:
MINS STILL FLASHING
PRESS PROGRAM TO SELECT
THE MINUTES, PRESS CHANGE
TO SET THE MINUTES.
& MINUTES FLASHING
11:30
11:00
0:00
PRESS PROGRAM TO SELECT
THE HOUR, PRESS CHANGE
TO SET THE HOUR.
& HOUR FLASHING
W
0:00
PRESS CHANGE TO
SET THE DAY
& DOT FLASHING
START PROGRAMMING THE ON / OFF TIMES WITHIN 1 MINUTE.
SET 1ST ON TIME FOR ALL 7 DAYS (e.g. 6:30 am Mon - Sun)
PRESS PROGRAM TO SELECT
HOUR, PRESS CHANGE TO
SET THE HOUR.
6 FLASHING
PRESS CHANGE TO SELECT
ALL DAYS.
ALL 7 DOTS & ON FLASHING
PRESS PROGRAM TO
SELECT THE 1st ON TIME
ON & DOTS FLASHING
ON
-- : --
ON
-- : --
6:00
ON
6:30
ON
PRESS PROGRAM TO SELECT
MINUTES, PRESS CHANGE TO
SET THE MINUTES.
30 FLASHING
PRESS PROGRAM TO PROCEED TO ‘SET OFF TIME’ NOTE THAT THE ALL DAYS WILL NOT FLASH.
SET 1ST OFF TIME (e.g. 9:00am Mon - Sun)
PRESS PROGRAM TO SELECT
HOUR, PRESS CHANGE TO
SET THE HOUR.
9 FLASHING
9:00
THE DAYS FOR THE OFF STATE
WILL REMAIN AS SET FOR THE
ON STATE ABOVE.
WHEN PRESSING PROGRAM -
ON WILL CHANGE TO OFF,
BUT NOTE THAT THE DOTS
MON - SUN DO NOT FLASH.
PRESS PROGRAM TO SELECT
MINUTES. CHANGE OR LEAVE
THE MINUTES IF REQUIRED.
00 FLASHING
ON
9:30
ON
CONTINUE PRESSING PROGRAM & CHANGE TO SET ANY OTHER ON/OFF PROGRAMS.
•
TO REVIEW THE SET PROGRAMS, OR TO RETURN SPEEDILY TO THE REAL TIME STATE, HOLD PROGRAM BUTTON DOWN UNTIL THE
PREVIOUSLY PROGRAMMED REAL TIME APPEARS
& STOPS, THEN RELEASE PROGRAM BUTTON.
•
AT THE REAL TIME & DAY DISPLAY, THE CHANGE BUTTON WILL OVERRIDE THE OFF TO ON & VICE VERSA.
•
ENSURE THE TIMER IS LEFT AT THE REAL TIME DISPLAY, BUT IN ANY EVENT IT WILL REVERT TO THIS AFTER 1 MINUTE OF INACTIVITY ON
THE 2 PUSH BUTTONS.
