Bpt GSMVRA/1-24, Руководство по установке

Страница: 6 / 10

Tel 01442 230 800 www.bpt.co.uk Tel 01442 230 800 www.bpt.co.uk
9
10
How to program a one button
analogue call panel
How to program multiple
analogue call buttons
Make a call into the Entry Panel.
Once the panel answers, enter
46 followed by the panel’s serial number (found on a
white label on the back of the main printed circuit board) to enter into programming.
E.G:
46 then 510444
You will now hear the Integrated Digital Assistant (IDA), so follow these voice options:
Make a call into the Entry Panel.
Once the panel answers, enter
46 followed by the panel’s serial number (found on a
white label on the back of the main printed circuit board) to enter into programming.
E.G:
46 then 510444
You will now hear the Integrated Digital Assistant (IDA), so follow these voice options:
THEN THEN
THEN THEN
THEN THEN
OR
OR: Enter the 3rd, 4th, 5th, 6th &
7th call forwarding telephone
numbers if required. OR: Enter the 3rd,
4th, 5th, 6th & 7th call
forwarding telephone
numbers if required.
In the Main Menu: “Enter ‘1’ then ‘STAR’ ( )
to set telephone numbers.”
*
In the Main Menu: “Enter ‘1’ then ‘STAR’ ( )
to set telephone numbers.”
*
“Enter the first phone number followed by
‘STAR’ ( ) or press ‘STAR’ ( ) now to keep:
‘01442 230800’.”
(Programmed from factory with the bpt support line)
* *
“Enter the first phone number followed by
‘STAR’ ( ) or press ‘STAR’ ( ) now to keep:
‘01442 230800’.”
(Programmed from factory with the bpt support line)
* *
*
“Enter the call button number to be
configured followed by ‘STAR’ ( ).”
(EG: Call button number 1)
*
“Enter the call button number to be
configured followed by ‘STAR’ ( ).”
(EG: Call button number 1)
* *
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
* *
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
* *
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
* *
“Enter the calling time in seconds followed
by ‘STAR’ ( ) or press ‘STAR’ ( ) now to
keep the default 30 seconds”
*
“Enter ‘0’ then ‘STAR’ ( ) to end configuration.”
*
“Enter ‘0’ then ‘STAR’ ( ) to end configuration.”
“Enter the second phone number
followed by ‘STAR’ ( ) ."
(If this is not required press ‘STAR’ to move on )
*
“Enter the second phone number
followed by ‘STAR’ ( ) ."
(If this is not required press ‘STAR’ to move on )
*
“Enter the next call button number to be
configured followed by ‘STAR’ ( ) ."
(EG: Call button number 2)
*
GSMVRA / LANDVRA GSMVRA / LANDVRA
GSMVRA/
1-24 call buttons
or
LANDVRA/
1-24 call buttons
GSMVRA/
1-24 call buttons
or
LANDVRA/
1-24 call buttons