BPG werks REV060413 Скачать руководство пользователя

Страница: 41 / 45

Washing the DTV

1. Wash mud and dirt off DTV with low

pressure water from a hose.
2. Wash DTV using a mild detergent or car

soap using a sponge, soft rag or brush. Do

not use any cleaning materials that could

scratch the DTV.

Be careful not to allow water to enter

the muffler outlet, air filter intake, brake

cables or switches.

Fuel Petcock

Transport Position

MAINTENANCE

Handle lock release lever

Transporting

1. Make sure Fuel Petcock is turned to the

“OFF” position.

2. Fold down DTV handle for storage and

transportation.

(use handle lock release lever to release

handle)

Never wash DTV with a power

washer.
High pressure will penetrate

bearing and o-ring chain seals

which will cause damaged to

the DTV.

CAUTION

Note:

To reduce the rolling friction of the tracks

they should be cleaned and lubricated on

the inside after use using a common

automotive “tire shine” spray-on

product.

Содержание REV060413














































Результаты поиска

Содержание REV060413

Отзывы:

Похожие инструкции для REV060413

Бренды по названию

Популярные бренды

BPG werks REV060413, Руководство владельца/оператора

Результаты поиска

Содержание REV060413

Отзывы:

Похожие инструкции для REV060413

Бренды по названию

Популярные бренды