will start reading the storage medium automatically after mode selection and will display the
total number of folders and MP3/WMA files.
4.
The system will then start audio playback from the media storage device (USB or SD card)
automatically.
Playback controls
PLAY/PAUSE
:Press this button once to stop playing, press it again to continue.
STOP : Press this button to stop audio playback, the display will then show the total
number of MP3/WMA files.
SKIP UP
: Press this button once to play the next file, press and hold this button to fast
forward through the files/tracks.
SKIP DOWN
: Press this button once to play the previous file,press and hold this button
to fast reverse through the files/tracks.
USB∕SD Mode: Press this button to toggle between USB and SD Card mode.
Important notes
The system can detect and read files in MP3 / WMA format only via the USB port or SD card
slot.You can connect an MP3 player to the system via the USB socket, however, some MP3
players may not be able to play via the USB socket. This is due to variances in the MP3
encoding format, it is not a malfunction of the system. There are numerous USB and SD
device producers and their products vary in solution and format. We therefore cannot
guarantee that this unit will support all USB and SD devices from every brand. This system
supports SD cards up to 16 GB.
MP3 / WMA track format requirements:
MP3 bit rate: 32 kbps～256 kbps;
WMA bit rate: 32 kbps ～320 kbps.
Programming tracks for playback (USB∕SD)
Up to 64 tracks can be programmed for MP3 / WMA file playback in any order. Before
programming, however, be sure the system is in STOP mode.
1. Set the function selector to USB/SD mode, then press the stop button.
2. Press the program PROG button, MEM will be flashing on the LC display, and it will
indicate the program number and digits for the track number to be programmed.
