boytone BT-38SM, Руководство по эксплуатации

Страница: 3 / 19

3
Avoid installing this unit in places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters, on top of other stereo equipment that radiates too
much heat, places lacking ventilation or dusty areas, places subject to constant vibra-
tion and/or humid or moist areas. Do not attempt to clean this unit with chemical sol-
vents as this might damage the finish. Use a clean dry cloth. Operate controls and
switches as described in the manual. Before turning on the power, make certain the AC
power cord is plugged in.
Store your CDs, Cassettes in a cool area to avoid damage from heat. When moving the
set, be sure to first disconnect the power cord.
UNPACKING AND SET UP
● Carefully remove the unit from the display carton and remove all packing material
from the unit.
● Unwind the AC power cord and extend it to its full length.
● Unwind the FM Antenna wire and extend it to its full length.
● Place the unit on a stable, level surface, convenient to an AC outlet, out of Direct
sunlight, and away from sources of excess heat, dust, moisture, humidity or strong
magnetic fields.
● Remove the opaque white plastic stylus cover from the phonograph stylus by sliding
it forward and down.
● Discard the stylus cover
● Remove the twist-tie that was used to secure the tone arm during shipment.
● Release the tone arm lock lever.
●
Connect the plug to your AC outlet.
POWER SOURCE
This product is designed to operate on 100V -240 AC Mains only. Attempting to op-
erate this system from any other power source may cause damage to the system,
and such damage is not covered by your warranty.