background image

2. Put your record onto the turntable and get it ready for playback. 
3. Press the record 

REC 

button

. I

t will take about 3 - 4 seconds to read the memory device, then 

the USB or SD icon will be flashing on the LC display. 

4. Press the skip up or skip down button to select the desired mode (USB or SD) for encoding, 

then press the record 

REC 

button again to confirm.(You can skip this step if only a USB drive 

or an SD/MMC card is inserted.) 

5. The system will start the encoding mode after a few seconds.   
6. Lower the tone arm to start playback of the record. During encoding, the USB or SD icon will be 

flashing on the display. 

7. To finish encoding, press the stop button. The display will show 

END

 and return to PHONO 

mode. 

NOTE

•  The recording speed is 1:1. Recording will take as long as playing the record. 
•  The recording format is preset at MP3 bit rate 128 kbps. 

The auxiliary input

 

Listening to a CD (or other auxiliary input)

 

1. Turn the volume knob clockwise to turn the equipment on.   
2. Use the function selector to select AUX mode, then connect the external audio device (such as 

a CD player) to the AUX IN socket at the front of the equipment. The audio signal from the 
external audio device will now be played through the system. 

3. If an external audio device is connected to the AUX IN socket, playing of the auxiliary device 

takes priority over cassette playback. 

AUX IN encoding

 

1. Use the function selector to select AUX mode and then insert a memory device (USB drive, SD 

or MMC card). 

2. Press the record 

REC 

button, it will take 3 - 4 seconds to read the memory device, then the USB 

or SD icon will be flashing on the LC display. 

3. Press the skip up or skip down button to select the desired mode (USB or SD) for encoding, 

then press the record 

REC 

button again to confirm.(You can skip this step if only a USB drive 

or an SD/MMC card is inserted.) 

4. The system will start the encoding mode after a few seconds. During encoding, the USB or SD 

icon will be flashing on the display. 

5. To finish encoding, press the stop button. The display will show 

END

 and return to AUX mode. 

NOTE

•  The recording speed is 1:1. Recording will take as long as playing the CD (or other auxiliary 

input). 

•  The recording format is preset at MP3 bit rate 128 kbps. 

 

Содержание BT-17DJM














Отзывы: