IF “LOST LINK” is displayed on the monitor,
1.
Check if power is connected to TX module. If power is connected to TX, a red light should be
on.
2.
If the red light is on, need to power.
3.
Pairing:
Press
buttons on both modules until red lights are flashing on both modules.
When connection is made, green lights comes on the modules and the camera will be
displayed on the module.
TX, RX and Wireless Specifications
TX
RX
Video Compatibility
AHD/TVI/CVI/CVBS
1080P/720P/D1/CIF
NTSC/PAL
1080P AHD
Video Connector
RCA (F)
RCA (F)
Operating Voltage
DC12V ~ DC24V
Current Consumption
140mA (Typical) @ 12V
Storage temperature
-30
℃
~ 80
℃
Working temperature
-20
℃
~ 70
℃
Operating Humidity
85% RH
Wireless Specification
Operating frequency
2.4GHz~2.4835GHz
Output Power
24±1dBm Max. Power Setting
Modulation Type
16QAM/QPSK/BPSK
RX Sensitivity
78dBm(Typ.)@12MHz,16QAM BER<1E-3
86dBm(Typ.)@12MHz QPSK BER<1E-3
RF Bit Rate
4MHz BER<1E-3
Spread Spectrum
FHSS (Adaptive frequency hopping)
Operating Distance
Up To 1650ft (Open Line of Sight)
WARRANTY INFORMATION
This one-year limited warranty is given to the end-
user or the retail purchaser (referred to this warranty as “Original
Purchaser”) that it will be free from defects in material and workmanship for a period of one year from the date of the
purchase of the new product (excluding accessory items such as power cords, cradle, memory card, adaptor, and cables).
