Boyo VTM7003QMA, Руководство по эксплуатации

Страница: 12 / 20

-
10
-
S
MAIN MENU
OSD SETUP
SYSTEM SETUP
TRIGGER SETUP
TRIGGER PRIORITY
RESET ALL
CAMERA SETUP
SYSTEM SETUP
AUTOSCAN OFF
SCAN DELAY 01 SEC
JUMP KEY LEFT
POWER ON H-SPLIT
BEEP ON
SYSTEM NTSC
DIMMER 01
REC-V OUT QUAD
LEFT H-SPLIT
RIGHT TREFOIL
FRONT Y-SPLIT
BACK
QUAD
DUAL
TRIPLE
PIP1
PIP2
PIP3
MAIN MENU
OSD SETUP
SYSTEM SETUP
TRIGGER SETUP
TRIGGER
PRIORITY
CAMERA SETUP
_
+
/
7.3 Jump Key Setting
REC-V OUT:
To set the camera input(s) to be recorded when connected to DVR via the green RCA wire.
Left-side, right-side, front view, rear view camera and quad view image can be selected.
AUTOSCAN:
To set the auto scanning function. When AUTOSCAN is set as ON,
monitor will automatically switch between connected camera inputs and quad image.
SCAN DELAY:
To set the switching time of AUTOSCAN. Switching time frame: 0-60 seconds.
JUMP KEY:
To set the shortcut display mode from the 13 modes to the left.It can be activated by jump key selector.
POWER ON:
To set the default display model from the 13 modes to the left or STANDBY mode.
BEEP:
To turn on / off the warning tone. Default setting is ON and there will be a beeping sound when menu is being operated.
SYSTEM:
To set TV system: PAL / NTSC.
DIMMER:
To set the camera input(s) to be displayed when “split”trigger wire is activated.
LEFT / RIGHT is to set the camera input to be displayed on the left / right side of monitor screen.
AUDIO is to set the audio output from any of the four cameras.