background image

 

6

 
 

OPERATIONS 

 

 
1. Press the POWER button on the monitor for 3 seconds, 

the power indicator will illuminate. 
 

2. This equipment has been paired successfully from the 

factory. If there is no display image, you will need 
to pair again. 

 

 

Pairing Method

: On the back of the Camera, there are 2 

threaded holes with a button screw in the lower hole. 

Unscrew the metal button in the lower hole and screw 
it into the upper hole. Then on the front of the 
monitor, press and hold the PAIRING button for 3s to 

pair the frequency signal in 30 seconds. If pairing is 
successful, remove the button screw from the top hole 

in the Camera and screw it back into the bottom hole. 
 

 

 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

3. If the image on the LCD is unclear, adjust the 

contrast, brightness and mirror by toggling the 

buttons on the monitor. 
 

Contrast Control:

 the 5 levels of LCD contrast 

can be adjusted by pressing the CONTRAST 
button. 

 

Brightness Control

: the 5 levels of LCD 

brightness can be adjusted by pressing the 

BRIGHTNESS button.

 

 

 

o  There are four different views for the monitor. 

If the image is not oriented correctly, press 
the MIRROR button on the monitor to change the 

orientation until it is correct. 

 

 
 
 
 
 
 

o  These different views allow you to mount the 

camera and/or monitor with either right side up 
or upside down and still display the image 
correctly on the monitor. The image displayed 

should match your rear view mirror. After 
testing the unit, fully tighten the Camera 

bolts.

 

 

 
Notice: 

Press the CONTRAST button for 4 seconds to reset the 

display to the factory default. 
 

For Sales Information Please Contact

RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.

Wilmington, NC 28411

(800) 507-0482 / (910) 686-4281

Содержание VTC700R









Отзывы: