Memasang Transmitter dan Receiver
To connect the transmitters and the receiver, follow these steps:
1. Make sure the supplied lavalier microphones are connected to the
transmitter microphones input or plug a line-level source into the
transmitter line input.
2. Turn on the transmitters and the receiver.
3. Set the transmitters and the receiver to the same channel. If you
are experiencing interference or noise on one channel, try a
4. When the headphone volume low, plug your headphones into the
receiver and gradually raise the level to a comfortable volume for
monitoring the transmission.
5. The Channel and Volume of the Transmitter and the Receiver are
- Adjust channel as you need.
- Adjust as necessary to make sure an ample level is being transmitted
to the receiver.
- The objective is to transmit the highest level without distortion for
the best signal-to-noise ratio throughout the signal path.
6. Once you have determined the transmission quality and level are
good, mount the transmitter and the receiver.
NOTE:
If you are connecting the receiver to a sound system, mute the sound
system. Do not monitor with the headphones at the stage. Anytime you
are changing the channel, remove your headphones and mute connected
sound systems to avoid audible RF noise bursts.
11
