background image

33

MAINTENANCE
•  Do not operate the device with wet hands or feet.

•  Clean the equipment only in the way described in 

    the instructions for use.

•  Take care to prevent the equipment from dropping 

    down.Make sure that the device is properly fastened 

    and reliably mounted. If the device has dropped down 

    on the floor have it inspected by a skilled electrician 

    before you switch it on again.

•  Should the equipment be damaged or defective,or if 

    you notice a scorching smell:

    Interrupt the electric power supply immediately by 

    removing the batteries.Do not operate the device 

    with a damaged housing,do not repair the device 

    yourself. Have the device only repaired by a skilled 

    electrician.

•  Always keep your device in good condition,as 

    specified in these in-structions for use.

•  Do not open the device.

WARNING

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, 
     including interference that may cause undesired operation.

Содержание BY-WM4 PRO




































Отзывы: