EN-16
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual
Projector
LED TYPE COLOR STATUS
MEANING
Power LED Green
Solid
The projector is powered and ready.
Power LED Red
Solid
The projector system has some problems with its fan, so
the projector cannot start up.
Lamp LED Green
Solid
The lamp is in good condition and is projecting at
maximum brightness.
Lamp LED Red
Solid
The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate until
it fails. Change the lamp and reset the lamp time
counter. If the lamp is off, then the ballast will become
malfunction.
Lamp LED Amber
Flashing
The projector is shutting down. The fan motor is cooling
the lamp for shutdown. Do not unplug the power cable
or turn the power switch off before the Lamp
LED turns off.
The fan motor will turn off when the lamp has cooled.
Lamp LED Red
Flashing
Temperature is too high. The lamp will turn off.
PROJECTOR CONTROL MENUS
This section describes how to make various adjustments and settings using the menus.
Changing a Menu Setting
The projector menus can be accessed using either the Projector Control Panel or the
Remote Controller.
1.Changing the menu display:
Press the MENU button either on the Remote Controller or the Projector Control
Panel.
Each press of the MENU button switches the display format as follows:
