BOXLIGHT PRO80S3, Руководство пользователя

Страница: 29 / 33

BOXLIGHT PRO80S3 Projector Preliminary User’s Manual
Page 29 of 33
33 RO Color Space Matrix Read
34 RW De-Gamma Table Select
35 RW De-Gamma Dnld Dest
36 WO De-Gamma Dnld Mailbox
40 RO System Configuration
41 RW DMD Bin Voltage Method Sel
42 RW DMD Bin Voltage Level Sel
43 RW Convergence
44 RW Formatter Color
45 RW Processing Path Select
46 RW Sequence Set Select
47 RO Sequence Sets Available
48 RO Sequence Set Data
49 RW Select LAMPSYNC Output
4A RW Flash MEM Access Time Sel
4C RW Command Sync ENABLE
50 RO System Status
51 WO System RESET
53 RO VERSION
55 RO Special Feature STATUS
60 WO Target Color Gamut Data
61 WO Measured Color Gamut Data
63 RW Enhanced Color Corr. Disable
FR,
FRR, FORMATTER Register Read FR, FRR,
FRG, FRB FRG, FRB
Read formatter registers:
FR - Read all formatters
FRR - Read RED formatter
FRG - Read GREEN formatter
FRB - Read BLUE formatter
The required parameter is the hexadecimal register number. The output is formatted as a stream of 8-bit or 16-bit
hexadecimal values as specified in the TI document –
Product Specification for DDP1000, DDP1010, DDP1011 Based
Modular Formatter Component Set [Dwg #2503986, Rev. J]. See FW below.
Syntax: fr[r|g|b] {register number}
> fr 0
RED Formatter Brightness Register: 1500 1500 1500
GREEN Formatter Brightness Register: 1500 1500 1500
BLUE Formatter Brightness Register: 1500 1500 1500
> frr 0
RED Formatter Brightness Register: 1500 1500 1500
> frg 0
GREEN Formatter Brightness Register: 1500 1500 1500
> frb 0
BLUE Formatter Brightness Register: 1500 1500 1500