Unloader Assembly Instructions
Package Includes:
Se ng Up The Bar:
Contents:
2 Pc Bar, Drag Sheet, 21" Handle, 2 Brackets,
4 Tube Clamps, 2 End Caps, Wrench, 2 Screws, Tape for
securing bars, 2 Velcro Straps, 1 Bumper Security Strap.
Addi onal tool Needed: Phillips Screwdriver
Step 1.
Join bars together to form one piece. Wrap tape
around seam to secure. A ach Drag Sheet to bar with
provided screws and wrench to pre drilled holes on bar.
Roll Drag Sheet over bar and secure with Velcro Straps.
When facing Bar make sure handle slot is to your le
nd
Drag Sheet rolls out over and away from you.
A aching Brack
k
ets:
Finishing Assembly:
Step 2.
Insert 1 tube clamp into Bar on each side. Tighten
screw on clamp to secure onto the bar. Next, insert brackets
one to each side. Keep handle slot to the le , insert brackets
with adjustable bolt side towards you. Finish by inser ng
second set of tube clamps to secure bracket to the bar.
Tighten screw on clamp.
Step 3.
Make sure Brackets have been inserted correctly.
Bracket with two buckles should be inserted on Handle side
of Bar. Add End Cap to each end of Bar. Insert Handle into
slot when ready to use. Please keep Bumper Security Strap
on hand for moun ng unloader.
2
Tube Clamp
Tube Clamp
Brac et
End Cap
Handle slot
Handle
Handle slot
