Bowmonk BrakeCheck Series 2, Руководство пользователя

Страница: 18 / 21

© 2001-2002 Bowmonk Ltd
Printing Test Results
The BrakeCheck can output test results to a printer if
required. A dot-matrix printer is available and is
recommended, although any correctly configured
printer can be used. A cable is provided with the
printer, or an optional Infra-Red link can be used.
To Print using the Cable
Connect the printer to the power pack provided.
Connect the supplied cable to the printer and Brake
Check.
If the BrakeCheck has powered-down due to
inactivity:
Press
Menu
until the Current Mode indicates the
test results to be printed. Ie, either Last…Service
Brake Test or Last…Hand Brake Test
Press
Enter
once, (this is not necessary if the
unit has not powered-down) the Peak Deceleration
(Front/Rear) LED will be lit and the display will show
a value, eg:
Press
Print
once, the display will show:
and the printer will print the results for the last test
performed.
Page 18 of 20