Shenzhen Bowei tech Co.ltd.
ADD:RM902;ShangMei Times;NO.57;LongGuan RD;Long Hua Dist Shenzhen, China;518000
Tel:86-755-29994192 13148703639
Email:[email protected] http://www.bowei-ch.com/
water pump sound.
4) Adjust the parameters, point the laser output to the treatment area. then
Press down the ready button and step on the laser foot switch, now the statue
become to [work], start to emit laser. At this time, you will find the display
screen start to count.
Pay attention:
During the treatment, patients should be coordinated with
operator, do not move,
do not open eyes, or it will damage the eyes. The
distance between probes and treatment area is about four fingers (about
12cm), the laser handle should be perpendicular to treatment area.
5) After finishing the operation, you have to release foot switch first, then back
to [standby], when the machine cooling down, then turn off the key switch and
laser control switch.
ATTENTION:
Uncomfortable Symptoms in 3-5 days after treatment
1.
The face will be redness or become swollen,
which is a role of heat that will promote collagen re-growth.
Pay attention:
do not make ice cooling at this time, just wait for 20-60 minutes,
they will be gradually disappeared.
2. The skin is very dry, so you have to pay more attention to keep moisture of
skin.
3. Some people will have a little allergic to carbon powder, you can rub some
external medicine.
Cosmetic and skin care products
1. Do not clean face with too hot water and irritant clean products;
2. Choose some moisture lotion and sun protection lotion for skin care;
3. Use some moisture essense, such as Hyaluronic Acid,B5 for skin repair
Daily Life
1. Do to go to High temperature places in 3-5 days after treatment, such as
sauna, Hot spring,sunbathing
2. Do not smoke, drinking, stay up all night
3. Pay more attention when make-up remover.
Daily Life
1. Do to go to High temperature places in 3-5 days after treatment, such as
sauna, Hot spring,sunbathing
2. Do not smoke, drinking, stay up all night
3. Pay more attention when make-up remover.
SETTING AND MAINTENANCE
1. Setting
Click the setup button on Function Selection Interface, enter “System Setup
Interface” (Fig. 13).The System Setup Interface could conduct the operation
