Bowflex Xtreme
®
SE Assembly Manual
15
Chest Exercises
Leg and Squat Exercises
Abdominal Exercises
Lat Pulldown Exercises
Assembly Guide
step 17
Tighten Hardware
17-1
Carefully go over the entire Bowflex Xtreme® SE home gym and tighten
all hardware before proceeding to the next step . Pay close attention to the
hardware installed in Steps 1, 3, 4, and 6 .
step 18
Connecting Cables
parts:
Completed Bowflex Xtreme® SE home gym
tool:
Scissors or other cutting tool (not included)
18-1
Remove the wrapping from around the coiled cable and pulley
attached to the Right and Left Frame Rails.
18-2
Remove the wrapping from around the coiled cable and pulley
attached to the left and right side of the lat tower .
18-3
Attach the cable to the home gym following the routing for the
various exercise positions .
note:
As you use your home gym, you will connect the cables and
pulleys in a variety of ways to perform the exercises . Refer
to the Owner’s Manual for information on using the Bowflex
Xtreme® SE home gym . .
