Bowflex TreadClimber TC100 Скачать руководство пользователя страница 28

Страница: 28 / 106

The Machine Settings Mode lets you adjust the date and time, review error messages, update key systems, and view the total run hours for the

machine.

1. Hold down the STOP/PAUSE button and Right button together for 3 seconds while in the Power-Up Mode to access the Machine Settings Mode.

Note:

Push STOP/PAUSE to exit the Machine Settings Mode and return to the Power-Up Mode screen.

2. The Console display shows the SET DATE prompt with the current date setting. The month value will be the currently active vales (flashing). Push

the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently

active value (month / day / year ).

3. Push the Right button until the next prompt is displayed.

4. The Console display shows the SET TIME prompt with the current time setting. The hour value will be the currently active vales (flashing). Push

the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently

active value (hour / minute / AM or PM).

5. Push the Right button until the next prompt is displayed.

6. The Console display shows the current Software Version.

7. Push the Right button to go to the next option.

8. The Console display shows the current MCB Version.

9. Push the Right button to go to the next option.

10. The Console display shows the VIEW ERROR MESSAGES prompt. Push the ENTER button to select this option. The Console display shows

ERROR VERSION X. Push the Right arrow button to view the error codes.

11. Push STOP/PAUSE to exit the error log.

12. The Console displays the RUN HOURS for the machine.

13. Push the Right button.

14. The Console displays the CONSOLE RESET prompt. Console Reset erases the settings of the User Profiles and all Workouts.

Note:

If you want to reset the Console, push the ENTER button. Push the Increase/Decrease buttons to select the “CONSOLE RESET

YES” option, and push ENTER. The Console will reset. Push STOP/PAUSE to return to the Power-Up Mode screen.

15. Push the Right button.

16. The Console displays the SOUND UPGRADE prompt.

Note:

If you have an update for the sounds, insert the USB Flash Drive with the update file into the Console and push the ENTER button.

Push the Increase/Decrease buttons to select the “SOUND UPGRADE YES” option, and push ENTER. The Console will display

“SAVING”, and then “REMOVE USB” when it is safe to remove the USB Flash Drive. The Console will exit the Machine Settings

Mode and return to the Power-Up Mode screen.

17. Push the Right button to exit the Machine Settings Mode and return to the Power-Up Mode screen.

MACHINE SETTINGS MODE

Содержание TreadClimber TC100











































































































Результаты поиска

Содержание TreadClimber TC100

Отзывы:

Похожие инструкции для TreadClimber TC100

Бренды по названию

Популярные бренды

Bowflex TreadClimber TC100, Руководство по обслуживанию

Результаты поиска

Содержание TreadClimber TC100

Отзывы:

Похожие инструкции для TreadClimber TC100

Бренды по названию

Популярные бренды