Bowflex TREADCLIMBER 1000 Скачать руководство пользователя страница 29

Страница: 29 / 44

Owner’s Manual

Maintenance

The safety and integrity designed into a machine can only be maintained when the equipment is regularly

examined for damage and repaired. It is the sole responsibility of the owner to ensure that regular maintenance is

performed. The owner is responsible to make sure that regular maintenance is done. Worn or damaged

components must be repaired or replaced immediately. Only manufacturer supplied components should be used to

maintain/repair the equipment.

This product, its packaging, and components contain chemicals known to the State of California to cause cancer,

birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you

would like additional information, please refer to our website at www.nautilus.com/prop65.

Always unplug your TreadClimber

machine from the outlet and let sit for 5 minutes before cleaning or servicing

the unit. To prevent unsupervised operation of the machine always remove the Safety Key and disconnect the

power cord from the wall outlet or machine AC inlet.

Routine Maintenance

For general routine maintenance and cleaning see the Care of the Machine section of this manual.

Walking Belt and Deck Lubrication

The TreadClimber

machine is equipped with a pre-lubricated, low maintenance deck and belt system. Belt friction may

affect the function and life of the TreadClimber

machine. For the best results from the TreadClimber

machine, lubricate the

treadles periodically with a silicone lubricant, using the following instructions:

1. Unplug the TreadClimber

machine completely from the wall outlet, and remove the power cord from the incoming

power plug.

WA R N I N G

A T T E N T I O N

D A N G E R

IMMEDIATE ACTION REQUIRED

C A U T I O N

Always unplug the power cord from the wall outlet and wait 5 minutes after unplugging the

machine before removing or installing parts to avoid the risk of electrocution, shock or

mechanical injury.

2. While the TreadClimber

machine’s treadle surfaces are still warm (not hot), apply a very thin layer of silicone

lubricant directly onto the treadle beneath each belt. Gently lift each side of the belt and apply a few drops of the

lubricant.

Always use a silicone-based lubricant. Never use a de greaser like WD-40

on the Bowflex

TreadClimber

exercise machine as this could seriously impact performance.

3. Plug the TreadClimber

machine back into the machine base and then into the wall outlet.

4. Stand to one side of your TreadClimber

machine.

5. Turn on your TreadClimber

, and start the belts at the slowest speed. Let the belts run for approximately 15

seconds.

6. Turn off your TreadClimber

machine.

7. Take care to wipe up any excess lubricant from the treadles and and surrounding floor. We also recommend a

periodic inspection of the treadle surfaces under the belts. If the decks appear worn, contact contact Nautilus

Customer Service.

To reduce the possibility of slipping, be sure the treadle area is free from grease or oil. Wipe off any excess oil

from the machine surfaces.

Use the following timetable as a guide to lubricate the decks:

Содержание TREADCLIMBER 1000













































Результаты поиска

Содержание TREADCLIMBER 1000

Отзывы:

Похожие инструкции для TREADCLIMBER 1000

Бренды по названию

Популярные бренды

Bowflex TREADCLIMBER 1000, Руководство пользователя

Результаты поиска

Содержание TREADCLIMBER 1000

Отзывы:

Похожие инструкции для TREADCLIMBER 1000

Бренды по названию

Популярные бренды