manualshive.com logo in svg

Bowdens Cable Core Identifier, Инструкция по эксплуатации

Поделиться
Скачать
Bowdens Cable Core Identifier Скачать руководство пользователя страница 2

Receiver 

Transmitter 

BOWDENS

 

Bowden Bros Ltd  -  Cable Core Identifier  - Operating Instructions  - page 2. 

The Cable Core Identifier  consists of a Transmitter with PP9 
battery (supplied), Receiver , and comes in a handy soft case. 

Remove  Transmitter battery cover and battery. 
Remove battery terminal cover  and connect 
PP9 battery. Replace battery cover 

Push button on transmitter to carry out battery test.  If  
GREEN  LED does not light change the battery, but only 
with an industrial capacity Alkaline PP3.   

Connect the receiver leads to the switchgear prods,  or 
the connected cable end. If the colours do not match 
make a note of the relationship between the lead 
colours and the cable core colours. 

Содержание Cable Core Identifier

Страница 1: ...tifier is designed as a simple tool to correctly identify the phase rotation of a three phase cable at a remote point on a known cable Follow these simple instructions for operation WARNING 1 Do not connect the CCI to a cable that has not been fully discharged Damage WILL be caused and is not covered under our warranty 2 Only use an Industrial Alkaline PP3 battery of the type supplied with the ins...

Страница 2: ...tery cover and battery Remove battery terminal cover and connect PP9 battery Replace battery cover Push button on transmitter to carry out battery test If GREEN LED does not light change the battery but only with an industrial capacity Alkaline PP3 Connect the receiver leads to the switchgear prods or the connected cable end If the colours do not match make a note of the relationship between the l...

Страница 3: ...itter In this example the RED LED is ON The Yellow LED is OFF The GREEN LED always lights Now follow the instructions on the back of the Transmitter The instructions have told us to swap the YELLOW and BLUE leads Press the button again and the RED LED is OFF the YELLOW LED is ON Refer to the instructions again The instructions tell us to swap the RED and BLUE leads Press the button and both the RE...

Страница 4: ... both A B Then phase identification at C is valid using a receiver at either not both A and B If the phasing is correct at A but incorrect at B then you will not be able to correctly identify phases at C If you disconnect at B using a receiving at A identification of correct phasing is possible at both B and C A B C USING THE BOWDEN BROS CABLE CORE IDENTIFIER ON A TEE CONNECTED CIRCUIT ...

Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды