Available Options
(for more details visit our website)
Laptop Option (LTH)
– Allows the destroyer to process 2.5-inch Form Factor Laptop Drives. Swapping supports takes
approximately 10 seconds. The holder allows the operator to stow the supports when not in use. The magnetic mounting enables
the holder to simply mount to the back of the unit. If the CASE option is ordered then a tool box is supplied instead of the holder.
Rear Output Slide (ROS)
- The hard drives typically are removed from the front of the unit. Because of the versatility of BOW’s
destroyers this option also allows for the ejection of the hard drives out the back of the unit, giving the user the ability to discharge
the drives into a disposal bin or container, requiring less operator handling and increasing throughput by up to 20%
Rackmountable Slide-out Shelf (EIA)
– For mounting in standard 19-inch EIA racks. This option allows the user to conveniently
stow the destroyer when not in use and pull it out when needed, saving all too valuable table-top space.
Universal Mount Kit (MNT)
– This option allows the customer to mount the destroyer to various surfaces, including carts, truck
floors, racks, etc.
Transport & Storage Case (CASE)
– A heavy duty Pelican® case with custom insert made specifically for the destroyer.
SPECIFICATIONS
Model Numbers
MHDD-N: NSA/CSS Approved Manual Operated Hard Drive Destroyer
Media Destroyed
Handles all 3.5-inch Form Factor Drives including .65-inch, 1-inch and 1.65-inch high drives. Handles
2.5-inch Laptop hard drives with LTH option. Handles SSD (Not NSA Approved for SSD) drives in 3.5
Form Factor and 2.5 Form Factor with the LTH option.
Options
LTH – Laptop Supports with Holder Option
ROS – Rear Output Option
EIA – Rackmountable Slide-out Shelf Option (for 19” EIA rac ks, 19” to 28” deep)(Includes Slides)
MNT – Universal Screw Down Mounting Kit
CASE – Transport & Storage Case
Manual Operator
Exertion
Typical Commercial Drives (3.5”) – Typically 4 lbs. exertion
Hardened (Heavy Shielded) (3.5”) – Typically 12 lbs. exertion
Operating Time
8 seconds or less (dependent on operator)
Dimensions
Footprint: 7 1/4" W , 9 1/4" D, 16 1/2" H (18.4 cm x 23.5 cm x 42 cm); 11” W with handle (28 cm)
Weight
49 lbs. (22 kg)
Shipping Information
Shipping Weight: 64 lbs (29 kg)
Shipping Dimensions: 28” x 17” x 17” (71.1 cm x 43.2 cm x 43.2 cm)
Destruction Method
Bends platter, damages heads, motor and circuit board
Maintenance
Occasional vacuuming of debris drawer and internal housing
Operating Temp.
Max. 176º F (80º C) Continuous Duty
Warranty
18 months (1 & 2 year warranty extensions available), Lifetime Warranty on Bender
Cage Code
53468
Patent
Patent Pending with U.S.P.T.O.
Manufactured & Sold by
BOW Industries, Incorporated
10349 Balls Ford Road
Manassas, Virginia 20109 U.S.A.
Tel: 703-361-7704
E-mail:
Website:
