Bouyer DN 3816, Руководство пользователя

Страница: 9 / 23

9
DN3816
6 INSTALLATION
The unit comes complete with everything needed to mount it into a 19” rack. Just four M6 screws are used to rack the unit.
6.1 Block diagram of the DN 3816 audio channels
6.1.1 Mic/Line audio inputs (1 to 4)
6.1.2 Line audio inputs (5 to 8)
6.1.3 Audio outputs (1 to 16)
7 CABLING, CONNECTIONS AND STARTING UP THE DN 3816
7.1 Mains power connection
The DN 3816 is 230V AC mains powered using the power cable supplied.
7.2 +24 V power supply
The DN 3816 must not be exposed to water (through splashing, from condensation, etc.).
Ensure the front and rear ventilation grills are kept clear at all times and that air flow around the unit is
not restricted. Ensure there is sufficient room at the rear of the unit (at least 100 mm) to connect the
cables.
Warning
DSP
Transformateur
Transformer
Pré-ampli Ligne
Line preamp
Détec.
Niveau
Level
detection
Tonalité
Tone
Volume Mute
Canal DSP/
DSP channel
Entrée audio/
Audio input
Vu-mètre/Vumeter
Noise
gate
DSP
Routage/
Routing
Egaliseur/
Equaliser
Volume Mute
Vu-mètre/
Vumeter
Preampli de sortie/
Output preamp
Canal DSP/
DSP channel
Sortie audio/
Audio output
Jour/Nuit
Day/Night
DSP
Pré-ampli Mic / Ligne
Mic/Line preamp
Détec.
Niveau/
Level
detection
Tonalité
Tone
Volume Mute
Entrée audio/
Audio input
Canal DSP/
DSP channel
Vu-mètre/
Vumeter
Noise
Gate
The DN 3816 may also be powered using a 24
V d.c. 60 W (minimum) power supply
connected to the +24 V two pin connector
block
.