Boundless ADDS, Руководство пользователя

Страница: 21 / 50

18
are connecting to and has been enabled. See your MetaFrame server documentation for more
details.
z
To change Speed Screen settings
In the Speed Screen section there are two list boxes, Local Text Echo and Mouse Click Feedback .
Local Text Echo accelerates display of the input text, effectively shielding you from experiencing latency
on the network. Mouse Click Feedback provides visual feedback of a mouse click, in that the mouse
pointer is immediately changed to an hourglass indicator. Select a mode from the drop-down list
：
a. For slower connections (for example if you are connecting over a WAN or a dial-in connection),
set mode to On to decrease the delay between user input and screen display.
b. For faster connections (for example, if you are connecting over a LAN), set mode to Off .
c. If you are not certain of the connection speed, set the mode to Auto to turn SpeedScreen on
or off depending on the latency of the connection. You can override Auto mode using the
Toggle Speed Screen hotkey.
Note
：
Local text echo does not support input using IME.
d. Click Enable Sound to enable sound support. From the pull-down list, select one of the following
quality levels.
ƒ
High . This value provides the greatest audio quality but should be used only when bandwidth
consumption is not a concern.
ƒ
Medium . Using this value results in less bandwidth consumption than when using High .
Compression of sound data provides greater bandwidth efficiency but reduces sound quality somewhat.
This value is recommended for most LAN-based connections.
ƒ
Low . This value offers the most efficient use of bandwidth but also decreases sound quality
severely. This value is recommended for low-bandwidth connections, including most modem
connections.
e. Click OK to save your changes.
3.5.3.6 Configuring Firewall Settings
If you are using a SOCKS proxy server to limit access to your Citrix servers, you must configure the ICA
Client to connect to Citrix servers through a SOCKS proxy server. You can configure a default SOCKS
proxy for all connections or use only a SOCKS proxy with a specific connection file. To do the former one
please refer to the section
‹
To configure a SOCKS proxy server for a specific connection entry
a. In the Terminal Connection Manager dialog box, click Configure .
b. Select the connection entry that you want to change and click Edit .
c. Click the Firewall Settings tab.