manualshive.com logo in svg

Boundless ADDS 4000, Руководство пользователя, Страница: 14 / 61

Поделиться
Скачать
Boundless ADDS 4000 Скачать руководство пользователя страница 14

x        Preface 

Safety Notices 

Danger Notices 

A danger notice indicates a hazard that could possibly cause death or serious personal 
injury. 
The following danger notices are used throughout this manual. 
 

 

DANGER:  

To prevent a possible electrical shock when installing the device, ensure 

that the power cord for that device is unplugged before installing signal cables. 

 

 

DANGER:  

To prevent a possible electrical shock when adding the device to a 

system, disconnect all power cords, if possible, from the existing system before 
connecting the signal cable to that device. 

 

 

DANGER:  

To prevent a possible electrical shock during an electrical storm, do not 

connect or disconnect cables or station protectors for communication lines, display 
stations, printers, or telephones. 

 

 

DANGER:  

To prevent a possible electrical shock from touching two surfaces with 

different electrical grounds, use one hand, when possible, to connect or disconnect 
signal cables. 

 

 

DANGER:  

To avoid a shock hazard: 

þ 

The power cord must be connected to a properly wired and earthed receptacle. 

þ 

Any equipment to which this product will be attached must also  be connected 
to properly wired receptacles. 

Содержание ADDS 4000






























































Отзывы:

Нет отзывов