Boumatic HandyFloor 2015, Руководство по установке и обслуживанию

Страница: 42 / 57

Page 42
9e1034
7.4 SERVICE AND MAINTENANCE
6
HandyFloor
Every
m il king Daily
50 hrs
or
week ly
250 hrs
or
monthly
1500
hrs
or
every 6
months
3000
hrs
or
ann ually
HandyFloor lifting unit
Check spindle motor for external damage
and leaks
Ɣ
Check all plastic wheels for play
2nd
year
Check adjusting sheath for wear Ɣ
Check chain for wear and corrosion Ɣ
Check whether chains are slack¹ Ɣ
Retighten a ll bolts Ɣ
HandyFloor frame
Wash/clean t he floor Ɣ
Check p lastic gratings for cracks
Cracked gratings must be replaced
Ɣ
Retighten all bolts Ɣ
HandyFloor control unit /operation
Calibration Ɣ
Open control unit and check for moisture Ɣ
Check if rubber caps on the pushbuttons are
tight
Ɣ
The following must be carried out within 1 year of start-up.
• The floor and the wall brackets must be cleaned.
• The floor must be calibrated immediately before start of maintenance.
• Move the floor down approx. 200 mm from its top position.
• Switch off the power to the control unit.
¹ If some of the chains are “slack”, the floor must be adjusted. Before the chains are adjusted, check whether the
floor can move freely in the guides.