Boulder 866 Analog, Инструкция по эксплуатации, Страница: 10 / 40

3-9
Placement and Installation
Your Boulder 866 Integrated is designed to reduce the effects that external magnetic fields and
radio frequencies (RF) have on its circuitry. While placement is not critical, known magnetic
fields should be avoided whenever possible.
Because it is heavy, the 866 must be placed on a sturdy, stable surface.
Do not place in an enclosed rack without ventilation. The 866 must have at least 3 inches (8 cm)
of airspace around the chassis for proper cooling and airflow.
Be sure to leave access to the AC mains and interconnect cables when installing the integrated
preamplifier. Depending on how easy it is to access the back panel of the 866, it may be wise to
pre-install the power and interconnect cables before placement.
Introduction