31
Output stage wiring
( ) Cut a piece of red wire
4"
(100mm)
long and strip both
ends 1/4” (6mm) . Attach one
end to terminal B2 and solder.
Attach the other end to terminal
2L.
( ) Cut a piece of red wire
2” (50mm) long and strip both ends
1/4” (6mm) . Attach one end to
terminal 2L and solder. Attach the
other end to terminal 4L and solder.
Also solder 2U and 4U and trim any
excess leads.
Output stage cathode resistors
( ) Twist one pair of the ends of the 3K ohm wirewound resistors together and solder them.
