Botron OMNIGND B92700 Скачать руководство пользователя страница 11

OMNIGND Operation Manual  

Page 19

Page 18 

OMNIGND Operation Manual

Functionality:

Technical Specifications:

Buzzer Alert

An audible alert that sounds on ground failure.

• 

The Buzzer alert for each individual port may be changed using the    

OMNIManager.

• 

In order for the Buzzer to sound:

 

º

The OMNIGND must be in logging mode.

 

º

The Port must be turned on.

 

º

The Buzzer feature must be selected.

• 

The Buzzer will continue to sound unless the failing Port or Buzzer is 

turned off from the OMNIManager.

Relay

The OMNIGND comes with two relay connections. Each port can be assigned 

to one of the two relays. The relays can be connected to compatible TLL 

devices, lights, alarms, doors, etc.

• 

The Relay Functions for each individual port may be set using the 

OMNIManager.

• 

When all of the active Ports with the Relay setting turned on are in 

PASS

 states; the switch will remain open, passing current to the device 

connected to the Relay. 

• 

When one or more of the active Ports with the Relay setting turned 

on are in 

FAIL

 states; the switch will be closed, not allowing passing 

current to the device connected to the Relay.  (See Relay warnings and 

specifications on page 20)

Select Button

The 

Select Button

 is used to toggle between Display screens and to enter 

into 

Logging Mode

 when the 

Auto-Logging Screen

 is displayed.

Ground Hub

When one of the banana jacks of the 

Ground Hub

 is connected to ground, 

the entire 

Ground Hub

 becomes a verified point of ground. The remaining 

banana jacks and ring terminals may then be used to ground workstations, 

carts, ionization, benches, matting, and much more.

• 

Size and weight

 

º

5.5″ x 4″ x 1.38″ (w/Stand 2.24″)

 

º

13.97cm x 10.16cm x 3.51 (w/Stand 5.69cm)

 

º

.7 lbs. (11.4oz.)

• 

Display

 

º

Tricolored LCD Screen (Red, Green, Blue)

• 

Connections and Expansion

 

º

(2) Relay Ports

 

º

(8) Data Ports

 

º

Aluminum Grounding Hub

• 

Electrical

 

º

12V Power Jack DC/100mA

 

º

RJ11 Serial Connector to PC

• 

Audio

 

º

Built-in audible failure alarm

• 

Internet Connection

 

º

RJ45 Ethernet Connector

• 

Logo

 

º

5 Blue LEDs located behind OMNIGND logo

Содержание OMNIGND B92700














Отзывы: