Botex Strobe Energy DMX 2000, Руководство пользователя, Страница: 6 / 8

6 / 8
3. Control
3.1. DMX mode
To get into the DMX, you have to set the Dip-Switch 10 to „On“.
•
With the help of the Dip-Switches 1-9 you can set the required DMX address. The active Dip-
Switches amount to the DMX address.
•
In the DMX mode the channels are as follows:
Channel 1 Speed
Channel 2 Dimmer
•
The DMX LED will begin to flash when there a DMX input signal.
3.2. Manual mode
To get into the DMX, you have to set the Dip-Switch 9 and 10 to „Off“.
•
Speed and dimmer are set with the help of the rotaries on the backside of the device.