2)" 1~9":Press PRESET firstly, and press the figure button 1~9 may
raise the PRESET 1~9.
Operation Guide
4)" x / x+x": Press FOLDER firstly, and then press the figure button
you can select to play the folder from local memory or SD card folder 1~8.
For example,
a.)Press 1~8, you can go to the local memory folder MUSIC1~8;
b.) Press 01~08,you can go to the SD card folder MUSIC1~8.
NOTE:
1)Effective distance from ADT-MP3 to LED Remote controller shall be limited
within the range of 6m. Otherwise, it results out of control.
20
3)"FREQ + x+x+x" / "x+x+x+x": Press FREQ firstly, and then press the followed
figure button orderly, this function is only available in the range of 870~1080. For
example, press "FREQ+8+9+8" you can enter into FM menu and it's frequency is
89.8MHZ.
The folder name must be named as MUSIC1,MUSIC2,MUSIC3, MUSIC4,MUSIC5,
MUSIC6,MUSIC7,MUSIC8 in both local memory and SD card prior to save your
music files into the folder. Otherwise, your music file can't be read by MP3 player.
5)"SONG + x+x": Press SONG firstly, and then press the followed figure button
you can select the music from the current folder. If you want to select the 8th
music from the current folder, you must press SONG+0+8, the music will be
raised and played. Otherwise, your selection will be void.
6)Press Scan, the unit automatically starts to search the broadcasting station.
After the scanning complete the unit will reserve those found stations, back to
FM mode, and then locate the first station.
Audio Repeat
ADT MP3 is playing MUSIC1~7
ADT MP3 is playing MUSIC8
AUDIO REPEAT
Folder(MUSIC1~7)
The current song
PLAY MODE
While the ADT MP3 is playing the folder MUSIC1~7, the player will repeat
playback MUSI1~7. While the unit is playing the folder MUSIC8, the player will
repeat playback the current song. As the following form shows,
The folder name must be named as MUSIC1,MUSIC2,MUSIC3, MUSIC4,MUSIC5,
MUSIC6,MUSIC7,MUSIC8 in both local memory and SD card prior to save your
music files into the folder. Otherwise, your music file can't be read by MP3 player.
Special Note:
Rear Panel View
Connects the port B of Junction Box Mp3. It's configuration as following.
2.Port B
1.Port A
Connects the port A of Junction Box Mp3. It's configuration as following.
1 = DMX OUT +
2 = DMX OUT +
3 = Emergent Contact
4,5 = GND
6 = Emergent Contact Set
7,8 = +24V
1= LED 1
2= LED 2
3= LED 3
4= Moving Sensor
5= GND
6= S
7,8= +24V
5
A
1
2
3
4
5
6
7
8
1. DMX OUT +
2. DMX OUT -
3. Emergent Contact
4; 5. GND
6. Emergent Contact Set
7; 8. +24V
B
A
1. LED 1
2. LED 2
3. LED 3
4. Moving Sensor
5. GND
6. Speak+
7; 8. +24V
380mA/CH.
1.2A MAX.
B
ADT-MP3
Made in P.R.C.
RoHS
Patent Pending
Warning: Never Reverse A and B