•
Using the #8 x 1 ¼” screws (smaller of the 2 sizes included), fasten each leg to
the seat
assembly (as shown below). It may be helpful to drill small pilot holes prior to fastening
the screws. Important Note: Be sure each leg is on the correct side. The larger pre-
drilled counter sunk holes should be on the outside, these are so the head of the screw
can be counter sunk and wood plugs be pushed in.
•
Next, fasten the triangular seat supports to the bottom of the seat assembly and legs,
using the same screws as in previous step (see below).
Содержание Pilot Seat
Страница 6: ......
