Power Supply
1
Power
Supply
Base
Station
Charging the Charger
2
Place the Charger in the Base
Station. When your Charger is fully
charged, the light will turn green.
OVER
Using the Belt
3
Plug the Power Supply into
an outlet and connect to the
Base Station.
Green light = a full charge
Amber light = a partial charge
No light indicates that a
connection is loose.
Place the Charger in the pouch of
the Charger Belt and push the
Power Button. Close flap.
Be sure that the Charger is
directly over the Stimulator.
Wrap the Charger Belt around
your waist and insert the strap
back through the loop.
Be sure that the Charger is
facing outward.
To open, undo Velcro® strap and
pull through belt loop.
Pull the strap in the opposite
direction and secure the Velcro.
If necessary, you can adjust the
other side.
