7
If you do not wish to run RCA cables to your subwoofer, you may use speaker wire to connect
the subwoofer in parallel with your main speakers. The subwoofer does not present any addi-
tional load to your receiver.
Select “subwoofer-no” from your receiver’s set-up menu. This sends the LFE signal to the main
left and right speakers, and thus, to the subwoofer. Consult your receiver’s owner’s manual for
more details.
When using the speaker wire hookup, the subwoofer’s built-in crossover is engaged. As a start-
ing point, set the crossover control on the subwoofer about 10Hz higher than the lower limit of
your main speakers’ bass response. Fine-tune the crossover setting by ear for the smoothest
blend with your main speakers. The best setting of the crossover control will depend on speaker
placement and personal preference.
Be sure to connect
+
to
+
(red) and
–
to
–
(black).
BACK OF RECEIVER
PV 4/6/8 MANUAL 7.1.99 ƒ 7/30/99 4:01 PM Page 7
