PRODUCT FEATURES
Product may vary slightly from what is illustrated.
A. Adjustable Lamp Head
B. Adjustable Arm
C. Clamp
D. Magnifying Lens
E. Power Switch
F. Tension Knobs
G. Tail Stop Handle
USING THE MAGNIFYING LENS: Flip the hatch upwards and turn on the light. To use the magnifier, adjust the
light to a comfortable position and view through the top of the lens. (FIG. 1)
ADJUSTING THE LAMP HEAD AND NECK: To adjust the light position, use the tension knobs located on the
lamp arm and head. (FIG. 2)
A
D
C
G
B
E
F
F
FIG. 1
0.5”
12.7mm
Min
Max
2.36”
59.94mm
POWERING ON/OFF: Press the power button once to turn the light on. Press the power button again to turn
the light off.
ASSEMBLY
Turn the handle at the bottom of the tail stop counter-clockwise to open the clamp.
Slide the clamp onto the mounting surface and turn the tail stop handle clockwise to tighten. Confirm
that the clamp is securely fastened before proceeding to the next step.
Loosen and remove the knob from the back of the clamp.
Carefully align and place the bottom of the light into the opening on top of the clamp.
To secure, reinsert the knob and tighten.
Connect the power cord to the AC adapter and plug the AC adapter into an outlet.
1.
2.
3.
4.
5.
6.
FIG. 2
Turn right
and left 45°
Turn up and
down 180°
0°-180°
13.4"
340.36mm
13.4"
340.36mm
7.1"
180.34mm
3.15"
80.01mm